TFFN/TEWN 600 Volts 90°C Copper

Bare, soft annealed copper per ASTM B-3, bunch stranded ASTM B-174 or B-8 and UL-62. High dielectric polyvinyl chloride (PVC) insulation per UL-62 and UL-1063. Overall Nylon Jacket per UL-62 and UL-1063.

CSA TEWN 105 °C FT1. CSA Spec C22.2 No. 127

Applications:
ECS
Catalogue
Number 		Conductor Insulation
(inches) 		Nylon
(inches)

Ampacity

(90°C Ambient)
(amps)

Nominal
O.D.
(inches) 		Total
Weight
(lbs/km)
No. AWG
Size 		Stranding
TF18ST 1 18 16 Strand .015 .004 6 .088 26
TF16ST 1 16 19 Strand .015 .004 8 .098 39

 

Colours: Standard colours are available.

Allowable ampacity per Table 402-5 of the 1999 National Electrical Code (NFPA 70-1999).

 

Applications:

General purpose building wire for installation as exposed or concealed wiring and in raceways (except cable troughs) in dry or damp locations.
Minimum recommended installation temperature minus 10°C (with suitable handling procedures).
Maximum conductor temperature 90°C dry, 75°C in wet locations, and 60°C when exposed to oil.
Approved for use with ceiling fixtures.